FENCING Awards 2021 Finalist - Mortimer St project by PH Fencing

FENCING Awards 2021 Finalist - Mortimer St project by PH Fencing

Mortimer St project by PH Fencing in Mudgee, NSW.

PH Fencing gave Australian Fencing Awards some key information on their Mortimer St project.

Challenges involved in the project

  • The greatest challenge was providing a stable 2.1m fence as a privacy fence on a decent slope.
  • Due to the height and the slope, we had no choice but to step the fence.
  • The fence had to be built on the inside of a brick wall.
  • The were also two other sections of fence, requiring different heights and material.
  • Privacy was of great concern and we had to schedule the build into an already busy period.
  • Access was tricky, as was staging the sections around other works in progress.

Products used on the project

  • We used COLORBOND REFLECT 2100mm in Monument with 75 x 75mm powdercoated steel posts in between panels to stabilise.
  • On the opposing side of the yard, we utilised COLORBOND Alleysleepers in Monument also under 1.8m panels of the same COLORBOND fence to increase the height.

Outcome of the project

  • The fence was installed and to date there have been no issues with privacy or wind issues.
  • The steel posts installed between panels were concreted in ground 1100mm, and stepped every two to three panels.
  • The Alleysleepers installed on the opposing side looked fantastic. The client was happy and continued on with the renovations.

This project by PH Fencing is a finalist in the Australian FENCING Awards 2021.